Tel : 0-2680-5800
| Cable Structure : | 2-core , 4-core, 6-core |
| Conductor : |
solid annealed copper |
| Conductor Sizes : | 0.5 0r 0.65 mm2 |
| Insulation : | Polypropylene or Polyethylene |
| Application : | For general use inside a telephone subscriber station. |
| Cable Structure : | Galvanized steel, solid |
| Conductor : | solid annealed copper |
| Conductor Sizes : | 0.65 0r 0.9 mm2 |
| Insulation : | Polyvinyl chloride (Black) |
| Application : | For extending an open wire line or distribution cable |
| pair from a pole or cable terminal to a building. |
| Cable Structure : | INSULATED AND PVC SHEATHED CABLES |
| Conductor : |
solid annealed copper |
| Conductor Sizes : | 0.5 0r 0.65 mm2 |
| Insulation : | Polypropylene or Polyethylene |
| Application : | For connecting subscriber equipment inside the building. |
| Cable Structure: : | Two insulated conductors twisted |
| Conductor : | solid annealed copper |
| Conductor Sizes : | 0.4,0.5,0.65 or 0.9 mm2 |
| Insulation : | Polypropylene or Polyethylene |
| Application : | For exchange area telephone |
| distribution lines, principally for aerial | |
| installation by attachment to a support | |
| strand. It may be used, however, in | |
| underground ducts where there is no | |
| damage due to mechanical abuse. | |
| APPLICATION : no water in ducts and underground. |
| Cable Structure : | Two insulated conductors twisted |
| Conductor : | solid annealed copper |
| Conductor Sizes : | 0.4,0.5,0.65 or 0.9 mm2 |
| Insulation : | Polypropylene or Polyethylene |
| Application : | For exchange area telephone |
| distribution lines, it is designed, | |
| especially for aerial installation by | |
| using the support messenger. |
| Cable Structure : | SHEATHED FILLED CABLE |
| Conductor : | solid annealed copper |
| Conductor Sizes: | 0.4,0.5,0.65 or 0.9 mm2 |
| Insulation : | Foam-skin polyethylene or polypropylene insulated |
| Application : | The cable is designed for underground (duct) or lashed to an aerial |
| suspension strand in either exchange area service or trunk service. |
| Cable Structure : | DOUBLE SHEATHED ALPETH CABLE |
| Conductor : | solid annealed copper |
| Conductor Sizes: | 0.4,0.5,0.65 or 0.9 mm2 |
| Insulation : | Polypropylene or Polyethylene |
| Application : | For exchange area telephone |
| distribution lines, It is designed for | |
| direct burial in ground where there is | |
| no damage due to mechanical abuse. | |
| APPLICATION : and no water in underground. |
| Cable Structure : | AL-PE SHEATHED CABLE WITH STEEL WIRE ARMOUR |
| Conductor : | solid annealed copper |
| Conductor Sizes: | 0.4,0.5,0.65 or 0.9 mm2 |
| Insulation : | Polypropylene or Polyethylene |
| Application : | For exchange area telephone distribution lines, in areas of low |
| security such as in canals; across bridges or directly burial in ground | |
| where mechanical conditions are not severe. |
| Cable Structure: | FOAM-SKIN INSULATION AL-PE SHEATHED FILLED |
| CABLE WITH STEEL TAPE ARMOUR | |
| Conductor: | solid annealed copper |
| Conductor Sizes: | 0.4,0.5,0.65 or 0.9 mm2 |
| Insulation : | Foam-skin polyethylene or polypropylene insulated |
| Application : | The cable is designed for underground (duct) or lashed to an aerial |
| suspension strand in either exchange area service or trunk service. |
| Cable Structure : | FIGURE 8 UNSHIELDED TWISTED PAIR DROP WIRE |
| Conductor : | solid annealed copper |
| Conductor Sizes: | 0.5 mm annealed copper,solid |
| Insulation : | Polyethylene |
| Application : | For use as aerial distribution service |
| wire serving high speed internet | |
| service such as ADSL, XDSL, leased line, etc. |
We use cookies to improve performance. and good experience in using your website You can study the details at Privacy Policy and you can manage your own privacy by clicking Setting
